Storm Control Setting; Figure 42: Ip Filter Setting - Edge-Core ECS4310-26T Management Manual

| General Security Settings
C 21
HAPTER

Storm Control Setting

S C S
TORM ONTROL
W I
EB NTERFACE
To configure IP Filter settings:
Click Security, IP Filter Setting.
1.
Select one or more ports to configure.
2.
Select the mode Static and set an IP address, or select DHCP.
3.
Select ports on which to allow traffic to DHCP servers.
4.
Click Apply.
5.

Figure 42: IP Filter Setting

ETTING
Broadcast storms may occur when a device on your network is
malfunctioning, or if application programs are not well designed or properly
configured. If there is too much broadcast traffic on your network,
performance can be severely degraded or everything can come to complete
halt.
You can protect your network from broadcast storms by setting a threshold
for broadcast traffic. Any broadcast packets exceeding the specified
threshold will then be dropped.
– 114 –