Table of Contents
Advertisement
374
Buffalo Surveillance Server
Field
What type of device will
be used to store data?
What is the name of this
Vault?
Click [ Next > ]. The Device window appears. Use to select a tape drive or tape library
(depending on the selection in the Description window).
Enter the following in the Device window:
Field
Devices Found
How much memory
should be used for each
data stream cache
Directions
Select Standalone Tape Drive.
Enter a name for the Vault, or use the default if the field
is already populated with a name you want to use.
Directions
Select a device. If no devices are listed, ensure that the
tape drive is connected to your computer and powered
on. If you are adding a Vault to a Windows computer,
ensure that the device is
Device Manager
. Then, click [ Look for Devices ]
369
to refresh the list.
Select How much memory should be used for each
data stream cache. This setting defines how much
virtual memory is set aside for incoming and outgoing
data during file storage and retrieval. A larger cache
may improve performance but will do so at the expense
of using more virtual memory. A selection of 10 MB is
usually sufficient.
disabled in the Windows
Advertisement
Table of Contents
