Table of Contents
Advertisement
Field
What type of device will
be used to store data?
What is the name of this
Vault?
Click [ Next > ]. The Device window appears. Use to select a tape drive or tape library
(depending on selection in the Description window).
Field
Devices Found
Directions
Select Tape Library.
Enter a name for the Vault, or use the default if the field
is already populated with a name you want to use.
Directions
Select a device. If no devices are listed, ensure that the
tape drive is connected to your computer and powered
on. If you are adding a Vault to a Windows computer,
ensure that the device or devices are
Windows Device Manager
Devices ] to refresh the list.
Some tape libraries do not support automatic detection of
their tape drives. In such cases, the phrase
"(drives need to be identified)" will appear to the right
of the device name. When you click [ Next ] , you will
need to select the drives.
Add or Remove Vaults
disabled in the
. Then, click [ Look for
369
361
Advertisement
Table of Contents
