Table of Contents
Advertisement
148
Buffalo Surveillance Server
Select Motion Detection. The Motion Detection Page will appear:
Each camera supports one motion detection area. This is the part of the camera's field of view
that is covered by motion detection. By default, the entire field of view is selected. You can
change the covered area to suit your needs by dragging the borders of the motion detection
area frame (titled SoleraTec_me above) and the entire frame itself so that it covers the area
that you want monitored for motion.
Adjust the following parameters to suit your needs:
By default, Include is selected and the motion detection area is titled SoleraTec_me.
Do not change these values
Field
Object Size
History
Sensitivity
Activity
When you are finished changing your Motion Detection settings, be sure to click [ Save ].
Enables you to determine how large or small a moving object
must be in order to trigger motion detection.
Enables you to determine the number of frames against
which motion will be measured.
Enables you to determine how much change will trigger a
motion even.
Displays a histogram of motion activity. The amount of
activity displayed will be determined by the settings you
choose.
Function
Advertisement
Table of Contents
