Table of Contents
Advertisement
322
Buffalo Surveillance Server
Field
Job name
FTP site address
FTP site user name
FTP site password
Destination folder at FTP
site
After setting the parameters, click Start Export to export videos. Buffalo Surveillance
Server begins to export files and a job status box appears in the Job Status pane.
While the job is running, Stop is active.
If you click Stop while Buffalo Surveillance Server is exporting files, the export is
stopped, and not all of the files in the Export Queue are exported. However, files
that have already been completely exported will remain on the target computer. Click
Dismiss to close the job status box.
Export to Rimage
This section deals with setting Retrieval Options for exporting to Rimage. The
options for export to Rimage appear when Export to Rimage is selected.
Export to Rimage works only if the Rimage system and Buffalo Surveillance
Server export are configured properly. If you have not done so already,
configure Rimage export using Rimage Export Configuration.
Meaning and Directions
When FTP site is selected, the fields available
change to support FTP.
A user defined field that associates a name with the job.
The name entered here appears in job logs.
Type a job name.
The FTP host name or address.
Type the host name or address.
User name required to log into the FTP site.
Type the user name to log into the site.
Password required to log into the FTP site.
Type the password to log into the site
Destination directory to store the files.
Type the destination path and directory the files
should be exported to.
Advertisement
Table of Contents
