Table of Contents
Advertisement
268
Buffalo Surveillance Server
Interactive Commands and their Arguments
After starting the application, you can enter the following arguments, one at a time, at the
prompt. When entering arguments, you can simultaneously enter required variables. You can
also enter just a given argument and wait for the system to prompt you for its required
variables.
Argument
clist
close
diag
drives
dstat <drive name>
errorlog <pathname>
format <notation type>
help | ?
license <pathname>
load <argument>
Description
Lists all current clients for the selected Vault.
Closes the connection to the selected Vault.
Sets the diagnostic mode for the selected Vault.
Lists drives for selected Vault.
Displays information about a selected drive. If the name
is not listed on the command line, you will be asked to
provide the name.
Sets the Vault's error log pathname.
Valid values:
pathname – the new error log pathname.
Enables users to set the current client address format.
Valid notations:
dot – the client computer network address will be
displayed.
host – the client computer name will be displayed
along with domain and subnet names.
full – The client's host name and port number will be
displayed.
Shows valid usage for commands. You can use only one
command at a time.
Sets the pathname for Information Repository license.
Valid values:
pathname – the new pathname to the license
file.
Loads the media for the selected Vault.
Advertisement
Table of Contents
