Instructions For Disassembly And Assembly - Tally T2265 SprintPro Maintenance Manual

Instructions for Disassembly and Assembly

5 Instructions for Disassembly and Assembly
This chapter provides the necessary information about disassembly and assembly
of the printer components and parts.
Caution:
Switch off the printer, wait a few seconds and remove the power cord.
Attention:
Give special attention on how the printer parts were mounted before. Avoid
touching the electronic components unless you are discharged on a protective
ground.
Recommended Tools
2)
Hook: 395 850
Magnet: 053 528
Phillips screwdriver medium
Screwdriver small
Grease Molycote white Longterm W2
1)
Normally, assembling is done vice versa of disassembling.
2)
To fix chassis into lower housing
1)
5-1