Replacing Motor Driver (Color Option); Replacing Connector Board - Tally T2265 SprintPro Maintenance Manual

Replacing Electronic Parts
5.3.6
Replacing Motor
Driver (Color
Option)
5.3.7
Replacing
Connector Board
5-12
Instructions for Disassembly and Assembly
– Remove Top Case (section 5.1.1)
– Unplug the two cables "A"
– Release the Board by pressing the snap in clamps up - and downwards "B"
– Remove Top Case (section 5.1.1)
– Remove Main Board (section 5.3.3)
– Remove Bottom Case (section 5.1.2)
– Disconnect all plugs on the Board
Attention:
Make sure to plug in the cables in the correct manner when reassembling.