Tally T2265 SprintPro Maintenance Manual page 17

Specifications
Multi part forms (to be tested individually!)
Number of copies
Standard printer
2T model
Weight of original
Weight of copies
Weight of bottom sheet
Thickness (max.)
Width
Form length
Set of forms
Paper quality
Paper Specifications
1 + 6
1 + 1
2
50 to 60 g/m
2
45 to 56 g/m
2
50 to 60 g/m
0.024 inches 0.6 mm
3 to 16.5 inches 76 to 420 mm
3 to 12 inches 76 to 305 mm
Sets of forms may be used only if the top edge is
bound. The binding edge should be as soft as
possible. A wavy binding edge may hamper the
smooth feeding of these sets. Multi-part forms have
to be inserted with the glued top facing down.
Multi-part forms should be tested for suitability.
Light pulp paper of medium fine quality, paper
bearing the quality mark SM Post and photocopy
paper are suitable for use. Unsuitable are:
satin-finish or coated papers, imitation art papers,
and embossed papers.
Since paper as natural material reacts strongly to
environmental influences (e.g. humidity,
temperature), the place of storage should be
selected carefully. We recommend that this kind of
paper should be tested extensively before larger
quantities are acquired.
Should papers with a dark reverse side be used,
these should also be tested for their functionality.
Please pay attention to the use of infrared reflecting
colors, when acquiring these papers.
2-7