Tally T2265 SprintPro Maintenance Manual page 82

Loading optional firmware or character generator
4-20
DOWNLOAD OK is displayed briefly when the procedure has been completed
successfully. The printer then runs through its initialisation routine, after which it is
ready for use.
It is possible to repeat the download separately, e.g. firmware followed by character
generator.
Loading the operating system for the first time
Connect your DOS PC (LPT1:) to the parallel port on the printer. Start from no. 3 in
the description above.
Troubleshooting
It is necessary to repeat the entire procedure if an error occurs during the download.
This is indicated by a corresponding message on the display. It may be that not all
fault messages can be shown on the display. In this case, the operating system of
your PC displays an error message such as "Write error on device
,,Download.fdf" stands for any firmware identification number (i.e. 48042X.FDF).
Testmodes and Troubleshooting
".