Remove Incremental Stripe
5.12
Remove
Incremental
Stripe
5-24
Instructions for Disassembly and Assembly
Attention:
First of all remove the protection foil (blue transparent color) from both sides of the
Incremental Stripe.
–
Open Top Cover
–
Open Front Cover
–
Remove Color Ribbon if neccessary
–
Guide a small screw driver through the hole in the back at the right side from the
bottom "A".
–
Pry the lower edge of the spring and press it in upper direction
–
If neccessary do the same procedure using the second hole in the front.
–
Release the stripe from the studs on the left and the right
Attention:
When assembling hook the clear area (without stripes) on the left side. Make sure,
that the incremental stripe runs in the light barrier at the bottom of the carriage.
A