Hand Held Products Dolphin 7900 User Manual page 142

WEP Mgmt Tab
The WEP Mgmt tab enables you to set WEP parameters for each port.
Note: The settings on this tab window are interrelated. This means that selecting one may disable access to others.
Field
Provide encryption
key dynamically
Use key for data
encryption
Use key to
authenticate with AP
Key
Key Index/Transmit
Key
9 - 30
Description
This option is selected by default. If this option is selected, the other WEP settings on this page
are disabled. To enter a custom WEP, de-select this option. The other fields become active.
Select this option to manually enter a WEP key to encrypt your data to the AP. You enter that
key in the Key field below.
Select this option if your network does not support 802.1x authentication and you need to
connect to the AP without username and password authentication. The key entered below is
used to authenticate instead.
The Key Index drop-down list contains the available keys. You may enter up to four keys for
reception; the Client will try all four to find one that works with the AP.
From the drop-down list, select the key to be used for transmission as well. If the key selected is
the transmit key, the Transmit key box is checked.
To change the transmit key, select another key and check the Transmit key box. The check box
of the original transmit key will be automatically de-selected.
In this field, enter the WEP key:
ASCII - 5 or 13 characters
Hexadecimal - 10 or 26 characters.
When the key entered is in the correct format, the
screen changes to display the type - ASCII or
Hexadecimal.
Dolphin® 7900 Series Mobile Computer User's Guide