Network Cards - Hand Held Products Dolphin 7900 User Manual

Network Cards

To see the network cards installed on the terminal,
1. Tap Start > Settings > Connections > Network Cards > Network Adapters tab.
2. In the list, tap on an adapter to review its settings. (Server-assigned IP addresses use DHCP.)
3. If you make a change on one of these tabs, tap OK. The following message appears:
4. You must perform a soft reset to update the registry; see
new registry entries created by the changes can be read by the applications that need them.
Do NOT perform a hard reset (see
!
return the terminal to factory defaults, which means that any network adapter modifications are lost.
7 - 32
Soft Reset (Warm Boot)
Hard Reset (Cold Boot) on page
on page 2-11. During the soft reset, the
2-11) after modifying an adapter here. Hard resets
Dolphin® 7900 Series Mobile Computer User's Guide