Hand Held Products Dolphin 7900 User Manual page 119

To Create a New Profile
In the Preferred Profiles section, tap the New button
Authentication.
Network Profile Tab
Field Description
Network Name &Type
Enter an SSID, which is the Network Name. Check with your network administrator for Network Name
SSID
(SSID).
Choose the transmit rate from the drop-down list - 1MB, 2 MB, Auto 1/2 MB, 5.5 MB, 11 MB, or Fully Auto.
TX Rate
The transmit rate is set to Fully Auto by default.
From the drop-down list, select
Type
Peer-to-Peer – This mode used for communication between two (or more) radio stations (cards) without
an AP.
Access Point (AP) – This mode is also called "Infrastructure" mode.
Scroll to select a channel for communication.
Chan
Select Low Density (default), Medium Density, or High Density from the drop-down list and tap OK.
AP Search
AP search thresholds are used for wireless client roaming between APs. In general, the higher the density
Threshold
selected here, the easier your WLAN card roams between APs with the same SSID in the same network.
Roaming also depends on the relative signal strength of the AP.
Tap this button to save the profile or changes to the profile.
OK
Tap this button to close the window without saving or modifying the profile.
Cancel
Note: The SSID, Type, TX Rate, and Channel fields are unchangeable in AP mode, whereas TX Rate and Channel fields
can be changed in Peer-to-Peer mode.
Dolphin® 7900 Series Mobile Computer User's Guide
. A screen opens with two tabs windows: Network Profile and
9 - 7