Com Port Assignment Table; Opening The Connections Manager - Hand Held Products Dolphin 7900 User Manual

Com Port Assignment Table

The Dolphin 7900 terminal ships with the Com ports assigned as follows:
Com
Assignment
Port
Serial port; this is the 17-pin connector on the bottom panel.
1
See
Bluetooth Module
2
If there is no Bluetooth hardware installed on the terminal, this com port is unassigned.
3 Raw Infrared
4 Unassigned
5 USB virtual serial port
IrDA, if IrDA is enabled. If IrDA is disabled, this com port becomes available.
6
See
Unassigned; these are virtual com ports that are available for selection only when
7, 8, 9
connecting to devices that use virtual com ports, such as Bluetooth.

Opening the Connections Manager

To open the connections manager, tap Connections. The connection manager opens displaying the Tasks tab.
The connections manager consists of two tabs: Tasks and Advanced.
Task tab
7 - 20
Mechanical Connector on page
Verify That the IrDA Port is Enabled
The Task tab enables you to configure and manage your My Work Network settings. Click on the link
to setup or manage existing network accounts.
3-9.
on page 8-5.
Dolphin® 7900 Series Mobile Computer User's Guide