Functions - Display; Overview Sewing Functions; General Functions - Bernina 560 Instruction Manual

Functions - Display

functions - Display

overview Sewing functions

1
2

General functions

Information
⦁ touch icon
►
another Display is opened
Back
⦁ touch icon
►
goes back to the previous Display
►
all changes are saved
confirm selection
⦁ touch icon
►
activates or confirms alteration/selection
Leaving the active Display
⦁
touch icon
►
the Display is closed
►
goes back to the previous Display
needle stop position up and «Quick reverse»-
button
If the «Quick Reverse»-button is pressed while sewing
or after stopping (e.g. zig-zag) with programmed needle
stop up, the sewing computer sews one stitch forward
before it switches to sewing in reverse.
needle stop position down and «Quick
reverse»-button
If the «Quick Reverse»-button is pressed after stopping
(e.g. zig-zag) with programmed needle stop down, the
sewing computer switches to sewing in reverse
immediately.
34
3 4 5
6 7 8
9 10
11 12 13
034790.50.04 _2013-03_Manual_B560_EN
⦁
touch «i»-icon
⦁ function Display appears
functions
1 Needle stop up/down
2 Pattern begin
3 Securing
4 Pattern repeat
5 Upper thread tension
6 Needle position
7 Mirror Image (Left/Right)
8 Security program
9 Mirror image (Up/Down)
10 Presser foot indicator
11 Permanent reverse sewing
12 Balance
13 Presser foot pressure
needle stop up/down
⦁
touch icon
►
the arrow on the Display points down
►
the sewing computer stops with needle down
⦁
touch the icon again
►
the arrow on the Display points up
►
the sewing computer stops with needle up
pattern begin
̶ the function appears when the sewing computer is
stopped while sewing a single stitch or a stitch
combination
►
the needle moves to the beginning of a stitch
pattern or program
Securing
⦁
touch icon before sewing
►
the single stitch is secured with four securing
stitches at the beginning
⦁ touch icon while sewing a single pattern
►
the single stitch is secured at the end
►
the sewing computer stops
⦁ to program the securing function within a stitch
combination
⦁ any single stitch of the combination can be secured
at the begin or at the end
pattern repeat
⦁
touch icon 1x
►
number 1 appears: the sewing computer stops at
the end of a single stitch or a stitch combination
⦁ touch icon 2-9x
►
numbers 2-9 appear: the sewing computer stops
after the selected repeats of single stitches or a
stitch combination
upper thread tension
⦁ change upper thread tension
►
the respective value is visible in the icon