Calibrating The Display; Altering The Acoustic Signals - Bernina 560 Instruction Manual

Setup Program

calibrating the Display

altering the acoustic signals

2
1
48
The Display calibration can be opened as follows:
⦁
turn off the sewing-/embroidery computer
⦁
touch the two needle positioning buttons on the front panel and
keep them pressed
⦁
turn on the sewing-/embroidery computer and release the
buttons as soon as the Display appears
⦁ touch «Display calibration»-icon
⦁
touch the calibration icon
⦁ touch the center of the cross using a blunt pen
►
the cross moves to the next position
⦁ repeat this until all three positions shown are calibrated
►
the Display is closed
►
the calibration is saved
⦁
touch «Acoustic signal»-icon
By touching 1 the signals are activated or deactivated.
3
Selecting Stitch pattern/function/BSr
Stitch patterns and function selection 2 can be confirmed acoustically.
⦁ touch the icon 3 with the loudpseakers for the stitch patterns until you hear
the desired sound
4
There are six different sounds to choose from.
►
the sound is indicated by a number (1-6)
⦁ the sounds for the functions 4 and the sound for quilting with the
5
BSR 5 can be activated or deactivated in the same way
►
the deactivation is indicated as last option when scrolling through the
different sounds
034790.50.04 _2013-03_Manual_B560_EN