Correcting A Stitch Pattern Combination; Inserting A Stitch Pattern; Altering Stitch Patterns - Bernina 560 Instruction Manual

Combi mode

correcting a stitch pattern combination

112

Inserting a stitch pattern

⦁ select the desired position in the combination
⦁
select the new stitch pattern
►
the new stitch pattern is inserted below the selected stitch pattern
To insert a stitch pattern at the beginning of a combination the cursor must be
positioned above the first stitch pattern.

altering stitch patterns

⦁
select the desired stitch pattern in the combination
⦁ touch «i»-icon
⦁
select desired function, e.g. Mirror image left/right
►
the stitch pattern is mirrored left/right
⦁ touch «Back»-icon
The alterations always affect the stitch above the cursor. Saved
stitch combinations can be altered or corrected in the same way. To
make corrections and alterations permanent, the combination must
be saved again afterwards.
034790.50.04 _2013-03_Manual_B560_EN