Accessing Other Partitions; To Access Another Partition; Global Arming - Honeywell VISTA-128BP User Manual

Accessing Other Partitions

To Access Another Partition

Each keypad is assigned a default partition for display purposes, and will
show only that partition's information. But, if the user is authorized, a
keypad in one partition can be used to perform system functions in other
partitions by using the GOTO command. Note that only those partitions
authorized and programmed by the installer can be accessed in this manner.
To GOTO another partition:
1. Enter your security code, then press
Entering partition number 0 will return the keypad to its original
partition.
LOG-ON TO
2.
PART. X COMPLETE

Global Arming

The Global Arming option may be assigned for use by some users. If Global
Arming was enabled for use with your security code, a keypad prompt
(message) shown below appears after pressing one of the arming function
keys (STAY, INSTANT, AWAY, MAXIMUM, OFF).
ARM P 1 2 3 4 5 6 7 8
HIT 0-8 X X X - - X - -
– 22 –
The keypad will remain in the new partition
AAAA
until directed to go to another partition, or
until 2 minutes has elapsed with no keypad
activity.
AAAA = alpha descriptor programmed by the
installer
X = partition number
The prompt displays all the partitions. The user
may only arm/disarm the partitions they are
assigned access to.
To select the partition(s) that are to be armed,
enter the desired number 1-8. An "X" will appear
under that partition. Entering a partition's
number again will delete the "X" and that
partition will not arm when this prompt is exited.
Pressing 0 will turn all partitions the user is
assigned access to on/off.
When completed, press ✳ to exit. All the partitions
with the "X" will then arm/disarm.
READY
T + partition number (0-8).