Master Keypad Operation - Honeywell VISTA-128BP User Manual

Global Arming Notes:
N
When performing a Global Arm, if there are faults in any of the selected
partitions, the system will enter a Summary Mode. Faulted zones in all
the selected partitions will be displayed. These faults must be corrected
or bypassed. This Summary Mode will end in approximately 120 seconds
if no keys are pressed.
N
When performing a Global Disarm, if any of the selected partitions has a
condition which would cause the keypad to beep (e.g., alarm memory or a
trouble condition), the system enters a Summary Mode and displays the
condition. This Summary Mode will end in approximately 120 seconds if
no keys are pressed.

Master Keypad Operation

A "Master" keypad is one that reflects the status of the entire system
(Partitions 1-8) on its display. This is useful because it eliminates the need
for a security officer in a building to have to "log-on" to various partitions
from one partition's keypad to find out where an alarm has occurred.
A description of a typical display follows:
The status of each partition is directly below the partition number on the
display. Possible status indications include:
A = Armed Away
I = Armed Instant
B = Bypassed/Ready ✴ = Alarm
F = Fire Alarm
C = Comm Fail
To obtain more information regarding a particular partition, enter [
[Partition No.] (i.e.,
order to affect that partition, the user must log on with a code that has access
to that partition. Also, in order for a user of any partition to log onto the
"Master" partition (Partition 9) to view the status of all partitions, and to
perform any functions at the Master keypad, that user must have access to
all partitions. Otherwise, access will be denied.
Accessing Other Partitions (cont'd)
SYSTEM
STATUS
S = Armed Stay
R = Ready
P = AC Power Failure L = Low System Battery
%
4). This will allow viewing only of that partition. In
1 2 3 4 5 6 7 8
R R N N A T ✴ B
M = Armed Maximum
N = Not Ready
T = Trouble
%
] +
– 23 –