Honeywell VISTA-128BP User Manual page 55

Programming Device Timers (cont'd)
00 ON TIME ?
00:00 PM
00 OFF TIME ?
00:00 PM
00 DAYS? MTWTFSS
HIT 0-7 X X
00 PERMANENT ?
0 = NO, 1 = YES 0
Enter the time you want the device turned on
using 00:01 - 11:59 format. When the display
shows the desired time, press the * key to move
to the AM/PM field. Press any key 0-9 to change
the AM/PM indication.
Enter 00:00 if this timer is not being used to turn
something ON for the days selected below. (ex.
using one timer to turn lights on one day and
using another timer to turn them off on another
day).
Enter the time you want the device turned off
using 00:01 - 11:59 format. When the display
shows the desired time, press the * key to move
to the AM/PM field. Press any key 0-9 to change
the AM/PM indication.
Enter 00:00 if this timer is not being used to turn
something OFF for the days selected below. (ex.
using one timer to turn lights on one day and
using another timer to turn them off on another
day).
Select the days on which the device is to be
activated by entering 1-7 (Monday = 1). An "X"
will appear under that day, indicating the output
for that day is active. Entering a day's number
again will deactivate that day. Pressing 0 will
turn all days on/off. The outputs will only be in
effect for the days
underneath them. As the week progresses, the
days are reset to the inactive state, unless the
permanent option
prompt). When completed, press * to continue.
Answering 1 (YES) means the system executes
this timer continuously. Answering 0 (NO)means
the system executes each day's output only once.
that have the letter x
is selected (next screen
– 55 –