Connecting The Video Input; Connecting The Loop-Through Video; Figure 2-1 16-Channel Dvr Rear Panel; Figure 2-2 Video Input Connectors - Honeywell HRXD9 User Manual

Installation
Power Connector
Your DVR can be used with either NTSC or PAL equipment.

Connecting the Video Input

Connect the coaxial cables from the video sources to the BNC Video In connectors.

Connecting the Loop-Through Video

22
Figure 2-1 16-Channel DVR Rear Panel
Video In
Audio In/Out
Alarm Inputs
Factory Reset Switch
Note You cannot mix NTSC and PAL equipment. For example, you
cannot use a PAL camera and an NTSC monitor.
Figure 2-2 Video Input Connectors
Figure 2-3 Video Loop-Through Connectors
USB Port RS232 Port
VGA Port
SVHS Out Spot Out
Video Out
SCSI Port Ethernet Port
Alarm Reset In
Alarm Outs
RS485