Notification Setup; Figure 3-31 Webguard Setup Screen; Figure 3-32 Notification Mail Setup Screen - Honeywell HRXD9 User Manual

Configuration
2.
3.
4.

Notification Setup

The DVR can be set up to send an e-mail or to contact a computer running RAS
(Remote Administration System) when an event occurs.
1.
2.
Document 900.0856 Rev 3.00
11/07
Figure 3-31
Highlight Use WebGuard Service and press
See Appendix D, WebGuard
Highlight the box beside Port and press
accessing WebGuard by using the Up and Down arrow buttons to increase or
decrease the numbers.
You can save your Network changes by highlighting Save and pressing
Selecting Cancel exits the screen without saving the changes.
Highlight Notification in the Network menu and press
screen (Figure 3-32) displays. You will be able to change the Mail and Callback
settings.
Figure 3-32
Highlight Enable and press
able to change the settings if Mail is enabled.
WebGuard Setup Screen
for detailed descriptions of the WebGuard service.
Notification Mail Setup Screen
to toggle between On and Off. You will only be
to toggle between On and Off.
. Set the port number used when
. The Notification
.
59