Codabar Concatenation - Honeywell 2020 User Manual

When Check Character is set to Validate, but Don't Transmit , the unit will only
read Codabar barcodes printed with a check character, but will not transmit the
check character with the scanned data.
* No Check Character
Validate Modulo 16, but
Don't Transmit
Validate Modulo 16 and Transmit

Codabar Concatenation

Codabar supports symbol concatenation. When you enable concatenation, the
image scanner looks for a Codabar symbol having a "D" start character, adja-
cent to a symbol having a "D" stop character. In this case the two messages
are concatenated into one with the "D" characters omitted. Default = On.
Character
Start Stop Start Stop
Codabar
A12D D34A
Select Require to prevent the image scanner from decoding a single "D"
Codabar symbol without its companion. This selection has no effect on
Codabar symbols without Stop/Start D characters.
On
* Off
Require
6 - 4