Data Format Editor; Data Formatter - Honeywell 2020 User Manual

ters to be replaced and xx
through zz and zz
1
E5 Terminates character replacement. Syntax = E5.
FE Compare character in current cursor position to the character "xx." If char-
acters are equal, increment cursor. If characters are not equal, no format
match. Syntax = FExx (xx stands for the hex value for an ASCII code, see
ASCII Conversion Chart (Code Page 1252)
EC Check to make sure there is an ASCII number at the current cursor posi-
tion. If character is not numeric, format is aborted. Syntax = EC .
ED Check to make sure there is a non-numeric ASCII character at the current
cursor position. If character is numeric, format is aborted. Syntax = ED .

Data Format Editor

Enter Data Format
Clear One Data Format
Save

Data Formatter

When Data Formatter is turned off, the barcode data is output to the host as
read (including prefixes and suffixes). Choose one of the following options.
Default = Data Formatter On.
* Data Formatter On,
but Not Required
5 - 4
defines replacement characters, continuing
2
.
2
on page A-2.)
* Default Data Format
Clear All Data Formats
Discard
Data Formatter Off