Honeywell 2020 User Manual page 172

The image scanner won't read your barcode at all.
1. Scan the sample barcodes in the back of this manual. If the image scanner
reads the sample barcodes, check that your barcode is readable.
Verify that your barcode symbology is enabled (see
2. If the image scanner still can't read the sample barcodes, scan
Symbologies
If you aren't sure what programming options have been set in the base, or if you
want the factory default settings restored, scan
Default Settings: Current Application Work Group
Troubleshooting the Cordless System
The image scanner must be linked to the base for the system to work properly.
See "Linking Image Scanner to Base" on page
12 - 4
on page 6-1.
Chapter
Resetting the Standard Product
on page 10-4.
1-5.
6).
All