Wand Emulation Plug & Play; Ibm 4683 Ports 5B, 9B, And 17 Interface - Honeywell 2020 User Manual

Wand Emulation Plug & Play
In Wand Emulation mode, the image scanner decodes the barcode then sends
data in the same format as a wand scanner. The Code 39 Format converts all
symbologies to Code 39.
The Same Code Format transmits UPC, EAN, Code 128 and Interleaved 2 of 5
without any changes, but converts all other symbologies to Code 39.
The Wand Emulation Plug & Play Code 39 Format barcode below sets the
terminal ID to 61. The Wand Emulation Plug & Play Same Code Format bar-
code sets the terminal ID to 64. These Plug & Play barcodes also set the Trans-
mission Rate to 25 inches per second, Output Polarity to black high, and Idle
State to high. (If you want to change the terminal ID only , without changing any
other image scanner settings, please refer to
Wand Emulation (Code 39 Format)

IBM 4683 Ports 5B, 9B, and 17 Interface

Scan one of the following "Plug and Play" codes to program the 3820/3820i for
IBM 4683 Port 5B, 9B, or 17.
Note: After scanning one of these codes, you must power cycle the cash
register.
1 - 22
IBM 4683 Port 5B Interface
IBM 4683 Port 9B HHBCR-1 Interface
IBM 4683 Port 9B HHBCR-2 Interface
IBM 4683 Port 17 Interface
Terminal ID on page 2-1.)
Wand Emulation Same Code