StarTech.com UNIDUPDOCK User Manual page 7

7. Follow the same procedure for either a SATA or IDE hard drive for the Destination side of
the duplicator dock.
NOTE: SATA and IDE hard drives can be mixed, so one side can be SATA while the other
is IDE.
8. Slide the power ON/OFF switch on the side of the unit to the ON position, to power up
the unit.
9. Once the unit has booted up, use the configuration buttons and built-in LCD display to
configure and operate the duplicator dock.
10. If using as an external hard drive dock, connect the USB cable from the duplicator dock to
the computer's USB port.
Instruction Manual
4