NETGEAR ProSafe FVS318N Reference Manual page 280

ProSafe Wireless-N 8-Port Gigabit VPN Firewall FVS318N
4. Complete the settings as explained in the following table:
Table 69. Add SSL VPN Policy screen settings
Setting Description
Policy For
Select one of the following radio buttons to specify the type of SSL VPN policy:
• Global. The new policy is global and includes all groups and users.
• Group. The new policy needs to be limited to a single group. From the drop-down list, select a group
name. For information about how to create groups, see
• User. The new policy needs to be limited to a single user. From the drop-down list, select a user name.
For information about how to create user accounts, see
Add SSL VPN Policies
Apply Select one of the following radio buttons to specify how the policy is applied. When you select
Policy to? a radio button, the fields and drop-down lists that apply to your selection (see explanations
later in this table) unmask onscreen.
• Network Resource. The policy is applied to a network resource that you have defined on
the Resources screen (see
page 273).
• IP Address. The policy is applied to a single IP address.
• IP Network. The policy is applied to a network address.
• All Addresses. The policy is applied to all addresses.
Network
Resource
IP Address
Virtual Private Networking Using SSL Connections
Use Network Resource Objects to Simplify Policies
Policy Name A descriptive name of the SSL VPN policy for identification and
management purposes.
Defined From the drop-down list, select a network resource that you
Resources have defined on the Resources screen (see
Resource Objects to Simplify Policies
Permission From the drop-down list, select Permit or Deny to specify
whether the policy permits or denies access.
Policy Name A descriptive name of the SSL VPN policy for identification and
management purposes.
IP Address The IPv4 or IPv6 address to which the SSL VPN policy is
applied.
Port Range / A port (fill in the Begin field) or a range of ports (fill in the Begin
Port Number and End fields) to which the SSL VPN policy is applied. Ports
can be 0 through 65535. The policy is applied to all TCP and
UDP traffic that passes on those ports. Leave the fields blank to
apply the policy to all traffic.
Service From the drop-down list, select the service to which the SSL
VPN policy is applied:
• VPN Tunnel. The policy is applied only to a VPN tunnel.
• Port Forwarding. The policy is applied only to port
forwarding.
• All. The policy is applied both to a VPN tunnel and to port
forwarding.
280
Configure Groups on page 293.
Configure User Accounts
on page 273).
on page 296.
on
Use Network