NETGEAR ProSafe FVS318N Reference Manual page 170

Table 36. Services screen settings (continued)
Setting Description
Finish Port The last TCP or UDP port of a range that the service uses. If the service uses only a single
port number, enter the same number in the Start Port and Finish Port fields.
Default QoS From the Default QoS Priority drop-down list, select the QoS profile that you want to assign
Priority to the service. For more information about QoS profiles, see
Service Profiles
3. Click Apply to save your settings. The new custom service is added to the Custom Services
table.

To edit a service:
1. In the Custom Services table, click the Edit table button to the right of the service that
you want to edit. The Edit Service screen displays:
Figure 91.
2. Modify the settings that you wish to change (see the previous table).
3. Click Apply to save your changes. The modified service is displayed in the Custom Services
table.

To delete one or more services:
1. In the Custom Services table, select the check box to the left of each service that you
want to delete, or click the Select All table button to select all services.
2. Click the Delete table button.
ProSafe Wireless-N 8-Port Gigabit VPN Firewall FVS318N
Note: This field is enabled only when you select TCP or UDP from the Type drop-down list.
on page 173.
Firewall Protection
170
Preconfigured Quality of