NETGEAR ProSafe FVS318N Reference Manual page 101

ProSafe Wireless-N 8-Port Gigabit VPN Firewall FVS318N
Figure 50.
3. Click the Add table button under the Static Routes table. The Add IPv6 Static Routing
screen displays:
Figure 51.
4. Enter the settings as explained in the following table:
Table 25. Add IPv6 Static Routing screen settings
Setting
Route Name
Active
IPv6 Destination
IPv6 Prefix Length
Description
The route name for the static route (for purposes of identification and
management).
To make the static route effective, select the Active check box.
Note: A route can be added to the table and made inactive if not needed. This
allows you to use routes as needed without deleting and re-adding the entry.
The destination IPv6 address of the host or network to which the route leads.
The destination IPv6 prefix length of the host or network to which the route leads.
LAN Configuration
101