NETGEAR ProSafe FVS318N Reference Manual page 44

2. Click the Add table button under the List of Available ISATAP Tunnels table. The Add
ISATAP Tunnel screen displays:
Figure 23.
3. Specify the tunnel settings as explained in the following table.
Table 7. Add ISATAP Tunnel screen settings
Setting
ISATAP Subnet Prefix
Local End Point
Address
IPv4 Address
4. Click Apply to save your changes.

To edit an ISATAP tunnel:
1. On the ISATAP Tunnels screen, click the Edit button in the Action column for the tunnel
that you want to modify. The Edit ISATAP Tunnel screen displays. This screen is
identical to the Add ISATAP Tunnel screen.
2. Modify the settings as explained in the previous table.
3. Click Apply to save your settings.

To delete one or more tunnels:
1. On the ISATAP Tunnels screen, select the check box to the left of each tunnel that you
want to delete, or click the Select All table button to select all tunnels.
2. Click the Delete table button.
ProSafe Wireless-N 8-Port Gigabit VPN Firewall FVS318N
Description
The IPv6 prefix for the tunnel.
From the drop-down list, select the type of local address:
• LAN. The local end point address is the address of the default VLAN.
• Other IP. The local end point address is another LAN IP address that you need
to specify in the IPv4 Address fields.
If you select Other IP from the Local End Point Address drop-down list, enter the
IPv4 address.
Internet and Broadband Settings
44