NETGEAR ProSafe FVS318N Reference Manual page 149

IPv6 DMZ WAN Inbound Service Rules

To create a new IPv6 DMZ WAN inbound rule:
1. In the upper right of the DMZ WAN Rules screen, select the IPv6 radio button. The screen
displays the IPv6 settings (see
2. Click the Add table button under the Inbound Services table. The Add DMZ WAN Inbound
Service screen for IPv6 displays:
Figure 72.
3. Enter the settings as explained in
Service, Action, and Log drop-down lists, you need to make selections from the following
drop-down lists:
• DMZ Users
• WAN Users
Unless your selection from the Action drop-down list is BLOCK always, you also need to
make selections from the following drop-down list:
• Select Schedule
4. Click Apply to save your changes. The new rule is now added to the Inbound Services
table.
ProSafe Wireless-N 8-Port Gigabit VPN Firewall FVS318N
Figure 68
Table 33
Firewall Protection
on page 144).
on page 132. In addition to selections from the
149