NETGEAR ProSafe FVS318N Reference Manual page 275

ProSafe Wireless-N 8-Port Gigabit VPN Firewall FVS318N
3. Specify the IP version for which you want to add a portal layout:
• IPv4. In the upper right of the screen, the IPv4 radio button is already selected by
default. Go to Step
• IPv6. Select the IPv6 radio button. The screen that lets you edit the resource displays
the IPv6 settings. This screen is identical to the screen for IPv4 (see the next screen,
which shows some examples).
Figure 167.
4. Complete the settings as explained in the following table:
Table 68. Resources screen settings to edit a resource
Setting
Add Resource Addresses
Resource Name
Service
Virtual Private Networking Using SSL Connections
4.
Description
The unique identifier for the resource. You cannot modify the resource name
after you have created it on the first Resources screen.
The SSL service that is assigned to the resource. You cannot modify the
service after you have assigned it to the resource on the first Resources
screen.
275