Wireless Security Profiles - NETGEAR ProSafe FVS318N Reference Manual

Wireless-n 8-port gigabit vpn firewall
Hide thumbs Also See for ProSafe FVS318N:
Table of Contents

Advertisement

provides the most reliable security. Use WPA2 only if all clients in your network support
WPA2. The wireless VPN firewall supports WPA2 with PSK, RADIUS, or a combination of
PSK and RADIUS.
For more information about how to configure WPA2, see
Profiles
on page 112.
WPA+WPA2 mixed mode. This mode supports data encryption with a combination of
TKIP and CCMP for both WPA and WPA2 clients. The very strong authentication along
with dynamic per frame rekeying of WPA2 make it virtually impossible to compromise.
The wireless VPN firewall supports WPA+WPA2 with PSK, RADIUS, or a combination of
PSK and RADIUS.
For more information about how to configure WPA+WPA2 mixed mode, see
and Enable Wireless Profiles
Note:
TKIP provides only legacy (slower) rates of operation. NETGEAR
recommends WPA2 with CCMP to make use of 802.11n rates and
speed.

Wireless Security Profiles

This section consists of the following subsections:
Before You Change the SSID, WEP, and WPA Settings
Configure and Enable Wireless Profiles
Restrict Wireless Access by MAC Address
View the Status of a Wireless Profile
Configure Wi-Fi Protected Setup
Wireless security profiles, hereafter referred to as wireless profiles, let you configure unique
security settings for each SSID on the wireless VPN firewall. The wireless VPN firewall
supports up to four wireless profiles (BSSIDs) that you can configure from the Wireless
Profiles screen (see
Each wireless profile provides the following features:
Capability to turn off the wireless profile during scheduled vacations and office
shutdowns, on evenings, or on weekends. This a green feature that allows you to save
energy.
WLAN partitioning to prevent associated wireless clients (using the same wireless profile)
from communicating with each other. This feature is useful for hotspots and other public
access situations.
MAC address access control list that lets you add another level of security.
Capability to monitor the clients that are connected to the SSID of the wireless profile.
ProSafe Wireless-N 8-Port Gigabit VPN Firewall FVS318N
on page 112.
Configure and Enable Wireless Profiles
Wireless Configuration and Security
Configure and Enable Wireless
on page 112).
109
Configure

Advertisement

Table of Contents
loading

Table of Contents