NETGEAR ProSafe FVS318N Reference Manual page 141

3. Enter the settings as explained in
Service, Action, and Log drop-down lists, you need to make selections from the following
drop-down lists:
• WAN Destination IP Address
• LAN Users (This drop-down list is available only when the WAN mode is Classical
Routing. When the WAN mode is NAT, your network presents only one IP address to
the Internet.)
• WAN Users
Unless your selection from the Action drop-down list is BLOCK always, you also need to
make selections from the following drop-down lists:
• Select Schedule
• Send to Lan Server
• Bandwidth Profile
The following configuration is optional:
• Translate to Port Number
4. Click Apply to save your changes. The new rule is now added to the Inbound Services
table.
IPv6 LAN WAN Inbound Rules

To create a new IPv6 LAN WAN inbound rule:
1. In the upper right of the LAN WAN Rules screen, select the IPv6 radio button. The screen
displays the IPv6 settings (see
2. Click the Add table button under the Inbound Services table. The Add LAN WAN Inbound
Service screen for IPv6 displays:
Figure 66.
ProSafe Wireless-N 8-Port Gigabit VPN Firewall FVS318N
Table 33
Figure 62
Firewall Protection
on page 132. In addition to selections from the
on page 136).
141