NETGEAR ProSafe FVS318N Reference Manual page 360

• MAC Address. The MAC address of the computer's or device's network interface.
• Group. Each computer or device can be assigned to a single LAN group. By default, a
computer or device is assigned to Group 1. You can select a different LAN group from the
Group drop-down list in the Add Known PCs and Devices section or on the Edit Groups
and Hosts screen.
• Action. The Edit table button, which provides access to the Edit Groups and Hosts
screen.
Note: If the wireless VPN firewall is rebooted, the data in the Known PCs
and Devices table is lost until the wireless VPN firewall rediscovers
the devices.
View the DHCP Log

To review the most recent entries in the DHCP log:
1. Select Network Configuration > LAN Setup. The LAN Setup screen displays the IPv4
settings. (see Figure 29
2. Click the DHCP Log option arrow to the right of the LAN Setup tab. The DHCP Log displays
in a pop-up screen:
Figure 217.
To view the most recent entries, click Refresh Log. To delete all the existing log entries,
click Clear Log. Click the LAN Setup option arrow in the upper right to display the LAN
Setup (IPv4) screen, from which you can modify the DHCP settings (see
VLAN Profile on page 56).
ProSafe Wireless-N 8-Port Gigabit VPN Firewall FVS318N
on page 56).
Monitor System Access and Performance
360
Configure a