NETGEAR ProSafe FVS318N Reference Manual page 98

ProSafe Wireless-N 8-Port Gigabit VPN Firewall FVS318N
Figure 49.
3. Enter the settings as explained in the following table:
Table 24. RIP Configuration screen settings
Setting
RIP
RIP Direction
Description
From the RIP Direction drop-down list, select the direction in which the wireless
VPN firewall sends and receives RIP packets:
• None. The wireless VPN firewall neither advertises its route table, nor accepts
any RIP packets from other routers. This effectively disables RIP, and is the
default setting.
• In Only. The wireless VPN firewall accepts RIP information from other routers
but does not advertise its routing table.
• Out Only. The wireless VPN firewall advertises its routing table but does not
accept RIP information from other routers.
• Both. The wireless VPN firewall advertises its routing table and also processes
RIP information received from other routers.
LAN Configuration
98