Omega FMG600 Series User Manual page 43

EXIT
New password
Page through the menu using push-buttons
item appears on the first line with the first character blinking. Select "EXIT" and depress
read "Write to EEPROM Press any key", usually
the data display menu will appear on the display. Use push-buttons
upwards through the menu items.
Select "New password" to cancel the existing password and define a new password enabling entry into the
Parameter setting mode.
Menu: Exit, depress
The display will read "Password 0000". Using push-button
and increase/decrease the selected figure by push-buttons
and depress . The display will read "Value entered Press any key". Press any key, preferably
menu will reappear on the display. Select the EXIT item and depress
EEPROM Depress any key". Press any key, preferably
mode and bring the data display menu on the meter display. Unless the programming procedure is
terminated in this way, the flow meter parameters will not be protected by a password. Page through the
menu items using push-buttons
Design, Assembly and Service Manual
Induction flow meter FMG600 series
/ New password, depress
(direction downwards) and
(direction downwards) and
. The meter programming mode will be terminated and
move the cursor to the desired decimal position
and , respectively. Enter the new password
. This command will terminate the programming
(upwards).
Page 41 of 44
(upwards). The selected menu
. The display will
and to page downwards and
. The display will read "Write to
. The Exit