JVC KD-NX5000 Instructions Manual page 99

Atftfitionallnformation
General
• There is a time limit for some operations.
In this case, if no further operation is done
for a certain period, the current operation is
canceled.
• By pressing SRC or MAP on the unit, you
can also turn on the power. The map screen
is displayed at turn-on if you press MAP, and
an AV screen if you press SRC. If the source is
ready, playback starts.
• You cannot select some sources if they are not
ready.
- SAT/CD-CH: cannot be selected without
connecting the target source component.
- DISC: cannot be selected if a disc is not in
the loading slot.
- EXT-IN: cannot be selected without
selecting Ext Input for the External
Input setting.
(IBF [93])
- Bluetooth Audio: cannot be selected if a
Bluetooth adapter is not connected.
• If you turn off the power while DISC is
selected as the source, disc play will start
automatically next time you turn on the
power.
• The voltage and the speed on the vehicle
information screen may be different from the
actual values.
Listening to the radio
Storing stations in memory
• When SSM is over, all previously stored
~
stations are erased and stations are stored
newly.
• When SSM is over, received stations are
preset in No.1 (lowest frequency) to No.6
(highest frequency), and preset station No.1
is tuned in.
• When storing a station manually, a previously
preset station is erased when a new station is
stored in the same preset number.
Satellite radio operations
• You can also connect the JVC SIRIUS radio
PnP (Plug and Play), using the JVC SIRIUS
radio adapter, KS-UIOOK (not supplied) to
the CD changer jack on the rear.
By turning ani off the power of the unit, you
can turn on/off the JVC PnP. However, you
cannot control it from this unit.
• To know more about SIRIUS Satellite radio or
to sign up, visit <http://www.sirius.com>.
• For the latest channel listings and
programming information, or to sign up
for XM Satellite radio, visit <http://www.
xmradio.com>.
Sound equalization / Additional information
99 ____