JVC KD-NX5000 Instructions Manual page 89

Phone Menu (continued)
The Bluetooth software and hardware version is shown.
Only for the registered devices.
Delete the registered devices.
~
[85]
(Initial setting)
Only for the device being connected for "Bluetooth Phone."
Auto: The unit informs you of the arrival of a message by ringing and
displaying Receiving Message. To read the message, press ENT
(~ [87]).
Manual: The unit does not inform you of the arrival of a message.
Only for the device being connected for "Bluetooth Phone."
Off:
The unit does not answer the calls automatically. Answer the call
manually.
On:
The unit answers the incoming calls automatically.
Reject: The unit rejects all incoming calls.
Only for the device being connected for ((Bluetooth Phone."
Adjust microphone volume connected to the Bluetooth adapter.
1,2,3
When the unit is turned on, the connection is established
automatically with...
Off:
No Bluetooth device.
Last: The last connected Bluetooth device.
Order:
The available registered Bluetooth device found at first.
Only for the registered devices.
After selecting a device from among the registered devices
(~
[85,
87]), establish the connection with it. ~ [85]
Selectable settings
Only for the device being connected.
Disconnect the current device before connecting another device.
~
[85]
*7 Selectable items vary depending on the connected device.
*2 Selectable only when the device is compatible with text message.
*3 Also available in Mode
in
AV Menu for Bluetooth Audio.
*4 Not selectable for New Device.
Bluetooth Information:
If you wish to receive more information about
Bluetooth, visit our
Jve
web site.
The Bluetooth word mark and logos are
owned by the Bluetooth SIG, Inc. and any
use of such marks by Victor Company of
Japan, Limited nVC) is under licence. Other
trademarks and trade names are those of their
respective owners.
Using Bluetooth devices
89 ~