Phone Menu - JVC KD-NX5000 Instructions Manual

Phone Menu
Enter the phone number.
Select a phone number from the list of the missed calls.
Select a phone number from the list of the received calls.
(Initial setting)
Only for New Device.
Make the unit ready to establish a new Bluetooth connection. Select
this when establishing a Bluetooth connection with a device for the
first time,
mainly from the device.
~
[84J
• Once the connection is established, it is registered in the unit. You
can connect the unit and the device by using Connect
(~
[89])
from the next time.
If the connected cellular phone has the voice recognition system, you
can call by voice command.
Only for New Device.
Shows the list of Bluetooth devices which requires some special
procedure to establish Bluetooth connection. Select a device you want
to connect.
~
[84J
• After selecting the device, use Open
or
Search
(~
above) for
connection.
• Once the connection is established, it is registered in the unit. You
can connect the unit and the device by using Connect
(~
[89])
from the next time.
Only for New Device.
Make the unit ready to establish a new Bluetooth connection. Select
this when establishing a Bluetooth connection with a device for the
first time,
mainly from the unit.
The unit searches for available new
devices.
~
[84
J
• Before starting a search, turn on the Bluetooth function of the
device so that the unit can detect it.
• Once the connection is established, it is registered in the unit. You
can connect the unit and the device by using Connect
(~
[89J)
from the next time.
Select a name, then phone number from the phone book of the
connected cellular phone.
You can read a message from the following message histories.
Unread: Messages you have not read.
Read: Messages you have read.
Unsent: Messages you have not sent.
Sent: Messages you have sent.
Select a phone number from the list of the phone numbers you have
dialed.
Selectable settings
..... 88