Using Bluetooth Devices; Cellular Phone/Audio Player Menu Operation For Bi Uetooth Devices; Registering A Bluetooth Device - JVC KD-NX5000 Instructions Manual

Using Bluetooth
@
devices-Cellularphone/audioplayer
For Bluetooth operations, it is required to connect the Bluetooth Adapter (KS-BTA200) to the CD
changer jack on the rear.
• Refer also to the instructions supplied with the Bluetooth Adapter and the Bluetooth device.
• Refer to the list (included in the box) to see the countries where you may use the Bluetooth®
function.
Menu operation for Bluetooth devices
Registering a Bluetooth device
AV screen:
.rJ1'jm~IIIIIIIIIII
• •
SRC
~
Bluetooth Audio
Map screen/AV
screen: other sources
1----..
than Bluetooth Audio
" " - -1
[Hold]
-
~ I
ODen
-
~
I
00en
I~
I~
Using the Bluetooth cellular phone
Map screen/
AV screen
Registering.a Bluetooth device
Mode
Bluetooth Phone
CP902i
10:35 AM
Preparation:
Operate the device to turn on its Bluetooth
function. .
To use a Bluetooth device through the unit
((Bluetooth Phone" and «Bluetooth Audio") for
the first time, you need to establish Bluetooth
wireless connection between the unit and the
device.
• Once the connection is established, it is
registered in the unit even if you reset your
unit. Up to five devices can be registered in
total.
• Only one device for Bluetooth Phone and one
for Bluetooth Audio can be connected at a
time.
Registration (Pairing) methods
• Use
Phone Menu
to register a device as a
cellular phone.
• Use
AV Menu
to register a device as an
audio player.
Open
Make the unit ready to establish
a new Bluetooth connection.
Connection is established by
operating the Bluetooth device.
Search
Make the unit ready to establish
a new Bluetooth connection.
Connection is established by
operating this unit.
Using Bluetooth devices
83 ....