ADTRAN IP 700 Series Administrator's Manual page 72

Appendix A. Configuration and Line Parameters
Parameter
MaxJitter
MessagesCallback
MwiLine
MwiExpires
MwiSubscribeUri
MwiPrimary
MwiSecondary
72
Table 12. Configuration Parameters (Continued)
Value Type Description
10 to 300 Sets the maximum time interval that
the jitter buffer can utilize when
dealing with delayed or misordered
packets. Valid values are 10 to
300 ms in 1 ms steps.
Default: 50
ASCII Indicates the user part of a SIP URL,
String such as 6133, or a valid SIP URL,
such as 6133@adtran.com, that is
called when the Message button is
pressed.
Default: *98
0 to 11 Specifies the line on which external
MWI server subscribes originate.
10 to 65536 Specifies the expiration interval of the
MWI server subscribes.
Default: 3600
Request URI Specifies the Request URI sent to the
external MWI server.
0 to 12 Specifies the primary voice mailbox
association. If a primary has not been
set, it should be assumed that a
primary mailbox does not exist.
0 through 11 refer to lines on the
NetVanta server, and 12 refers to the
external mailbox.
0 to 12 Specifies the secondary mailbox
association. If a secondary has not
been set, it should be assumed that a
secondary mailbox does not exist.
0 through 11 refer to lines on the
NetVanta server, and 12 refers to the
external mailbox.
Copyright © 2009 ADTRAN, Inc.
IP 700 Series Phone Administrator Guide
Sources
Config File
Web Interface
Config File
Web Interface
Config File
Web Interface
Config File
Web Interface
Config File
Web Interface
Config File
Web Interface
Config File
Web Interface
61200770E1-31C