Table 5. Line Key Assignments - ADTRAN IP 700 Series Administrator's Manual

Configuring Common Features
Line Key Type
Line Button.z.Type
Button.z.Line
Button.z.Label
BLF/DSS Button.z.Type
Button.z.BlfUri
Button.z.Label
Button.z.Number
Button.z.Realm
Speed Button.z.Type
Button.z.Realm
Button.z.Label
Button.z.Number
DND Button.z.Type
Button.z.Label
The line key number is designated by the value of z in the Associated Parameters listed in
Table 5. Replace z with 1 through 6 when configuring an IP 706 phone and 1 through 12
when configuring an IP 712 phone.
Example 1:
This example configuration is for an IP 706 phone on a key system where lines 1 through 3 are SCAs and
lines 4 and 5 are GI lines. The last line key is a BLF/DSS monitoring another extension.
#Phone button assignments
Button.1.Type line
Button.1.Line 1
Button.1.Label 732-758-1000
Button.2.Type line
Button.2.Line 2
Button.2.Label 732-758-1001
Button.3.Type line
Button.3.Line 3
Button.3.Label 732-758-1002
Button.4.Type line
Button.4.Line 4
Button.4.Label ICOM
Button.5.Type line
Button.5.Line 5
46

Table 5. Line Key Assignments

Associated Parameters
Copyright © 2009 ADTRAN, Inc.
IP 700 Series Phone Administrator Guide
Description
Assigns the type.
Associates a line definition to a line key.
Assigns a label for the line key.
Assigns the type.
BLF URI to which BLF subscriptions are sent.
Assigns a label for the line key.
Extension to monitor or dial on outgoing.
Automatically set to Internal by the phone.
Assigns the type.
Type of line to originate the call on.
Assigns a label for the line key.
Number to call.
Assigns the type.
Assigns a label for the line key.
61200770E1-31C