Imbalance Control; Drain Hold ("Water Recycling"); Changing A Wash Cycle - Baumatic BWM5001 Instruction Manual

Imbalance control

o If the laundry load is unbalanced when the washing machine begins
to spin, the cycle will stop while more water is added to redistribute
the load. This process may be repeated until the load is sufficiently
balanced for the spin to continue.
o If there is excessive vibration during the spin part of the program,
you should open the lid and wait until the drum stops moving. You
should then redistribute the load evenly in the machine.
o When the lid is closed, the spin part of the cycle will restart
automatically in a few seconds.

Drain Hold ("Water Recycling")

o The "water recycling" function means that the machine will not
execute the last drain of the wash cycle. This means that the
laundry will sit in the water until you are ready to remove it for
drying, preventing it from developing creases.
o After you have selected a wash cycle, press the 'Process' button
(10) to turn the water recycling mode on. Ensure that "Water
recycling" lights on the LED display. To turn the water recycling
mode off you should press the process button until the water
recycling light goes out on the LED display.
o At the end of the wash cycle the water will not drain and "water
recycling" will flash in the display. The machine will also beep every
5 minutes. When you are ready to complete the wash cycle and
drain the water you should press the "process" button and the
machine will then execute the last drain of the water.
o NOTE: There is the option here to manually drain the water using
the drainage pipe if you desire. This way you can 'recycle' the
water. Please ensure you have an adequate container ready for the
water. (BWM5001 = 51L+, BWM7001 = 61L+)

Changing a wash cycle

o If you want to change your wash program after it has started you
can do so by pausing the current washing cycle by pressing the
start/pause button (2).
o You can then select your desired wash program.
o Press start/pause button (2) to resume washing with the new wash
cycle.
21