Control panel
1) Power button. Press this button to turn the power on or
off.
2) Start/pause button. Operation and temporary stop is
repeated as it is pressed. When you want to change a
program while it is in use, press this button, then select the
program you want to change to, and then press this button
again.
4) Temperature button. This button can be used to
adjust the temperature of the water according to the type
of load that needs cleaning. As the button is pressed, the
temperature of the water can be selected through the
following options:
Cold
3) Wash program selection
knob. You can select the wash
cycle you want by rotating the
knob to choose from 8 options
around the outside.
30°C
40°C
60°C
95°C
9