Imbalance Control; Maintenance And Cleaning; In Daily Use; Control Panel And Washing Machine Cabinet - Baumatic BWM50 Instruction Manual

Imbalance control

o If the laundry load is unbalanced when the washing machine
begins to spin, the cycle will stop while more water is added to
redistribute the load. This process may be repeated until the load
is sufficiently balanced for the spin to continue.
o If there is excessive vibration during the spin part of the
program, you should open the lid and wait until the drum stops
moving. You should then redistribute the load evenly in the
machine.
o When the lid is closed, the spin part of the cycle will restart
automatically in a few seconds.

Maintenance and cleaning

In daily use

o Once a wash cycle has completed, you should pull out the
detergent drawer slightly, so it can dry out.
o Leave the lid open for a short while after a wash cycle has
completed. This should help to prevent stagnant smells and to
protect the seal.
o Close the water tap.
o We suggest that you disconnect the appliance from your mains
supply, when it is not in use.

Control panel and washing machine cabinet.

IMPORTANT: Do not use any abrasive cleaner or household polish on
either the control panel or operating parts.
o Wipe over the control panel and the external surface of the
machine using a brand new damp cloth with warm water.
o If you ever spill any liquid detergent or conditioner from the
detergent drawer onto the washing machine cabinet, then these
should be cleaned up immediately as they could be corrosive.
18