Control Panel - Baumatic BWMI1206.1 Instruction Manual

Control panel

A) Door open button
B) Door lock indicator light
C) Start/Pause button
D) Delay start button
E) Easy iron button
F) Extra rinse button
G) Cold wash button
H) Spin speed button
I) Spin speed indicator
J) Remaining time indicator
K) Program selection dial
L) Cycle option indicators
M) Detergent drawer
Door open button
Door lock indicator light
The door lock indicator will light when the door is fully
closed and the machine is switched on. When the
Start/Pause button is pressed to start a wash cycle,
the indicator will flash for a few seconds and then light. If the door
is not closed the indicator will continue to flash. The door
cannot be opened until the door lock indicator has gone out.
Press this button to open the porthole door. A
safety device prevents the door from being
opened immediately after the end of the cycle.
You should wait for 2 minutes after the wash
cycle has finished and the door lock indicator
light has gone out before opening the door.
9