Delay Start; Safety Lock - Baumatic BWM5001 Instruction Manual

Delay start

You are able to delay the start of a wash cycle so the laundry is
finished at a time that is most convenient to you.
o You should introduce the detergent into the detergent drawer or
drum and then add the laundry as normal. You can then select your
required wash program following the instructions outlined in the
previous section.
o Instead of pressing the start / pause button (2) to begin the
program straight away, you should press the preset button (3) to
set a delayed time.
o Each press of the preset button (3) will increase the delay time by
1 hour. The number of hours displayed indicates when the wash
cycle will come to an end.
o The washing machine will begin the program automatically, at an
appropriate time to ensure that the wash program is complete by
the time you have set. For example, if you program a delay time of
3 hours, this means that the wash program will be finished in 3
hours.
o You can set a delay time from 2 to 24 hours.
NOTE: If you want to cancel a delay start you must turn off
(restart) the machine. You will need to then reset your
program / options again.

Safety lock

In order to prevent any inadvertent operation of the control panel, you
can set a safety lock to deactivate all of the buttons.
o After the wash program has started, press the Rinse button (6) and
the wash button (8) simultaneously for about 2 seconds. The
machine will then beep to indicate that it has entered the safety
lock state.
o All the buttons will be deactivated and the display will show "Child
Lock" displayed in the LED display.
o To release the safety lock, press the Rinse button (6) and the wash
button (8) simultaneously for about 2 seconds again. The machine
will beep again and the "Child lock" will be deactivated and will go
out on the LED screen.
20